Silverwing tank nspection services and equipment manufacturers
Silverwing ME Specialist Insection Services and Equipment
Non destructive testing home Above ground storage tank inspection services Non destructive testing equipment sales Non destructive testing equipment servicing Non destructive testing brochures and software news Non destructive testing enquiries
       

     
  ScanmapVS
ScanmapVS remote access ultrasonic C-Scan imaging system developed by Silverwing (UK)
   
       
 

The ScanmapVS system utilises the proven reliability of the Scorpion wall crawler with an added transverse scanner fitted to the front end. The transverse scanner covers a 130 mm wide strip at a speed of 700 mm per second and with a forward crawler speed of 900mm per minute.

Using a single 10mm diameter short pulse 5MHz transducer mounted in a water column the ScanmapVS is effectively a remote access immersion system. Sampling every 6mm in the direction of travel the ScanmapVS provides rapid inspection whilst achieving complete UT coverage.

 

 
 

A scan, B scan and C scan

6mm raster pitch gives 100% coverage

130mm scan width 900mm/min forward speed

 

.
The ScanmapVS inspecting a tank

 

 
 

 

front of scanma
The ScanmapVS

 

By combining an existing high speed ultrasonic pulser/receiver card and ultrasonic imaging software with the Scorpion scanner, Silverwing’s latest product, the ScanmapVS benefits from proven technology at the outset. Stored data can be viewed as either A-scan, B-scan or C-scan images.

The adjustable scanning head allows inspection of small vessels and pipes with a minimum diameter of 1m. The ScanmapVS now makes it possible to ultrasonically scan a 130mm wide strip vertically up tank walls and columns or circumferentially around vessels and pipework covering approximately 7 square meters per hour. Meet or even exceed the requirements of the relevant inspection standards without the need for costly rope access or scaffolding.

 
 
 
 

Technical and Performance Specification

Dimensions
Length 405 mm x Width 250mm x Height 120 mm
Weight without cables
8 Kg
Adhesion
Neodymium iron boron magnets mounted in centre of carriage
Pull off force
13.6 Kg
Drive
four (4) independent 12 volt Dc motors
Drive wheels

coated in special non-slip synthetic rubber compound

Speed
900 mm/min
Umbilical Cable

30 metre

Transducer

Single short pulse 5MHz

Transverse Scanner

130 mm wide. Scan speed: 700 mm per second
Forward crawler speed of 900mm per min

Power supply
220/110 vac input 12vdc operation
ScanmapVS System Supplied

Windows XP
PC PIII 2GHz or better processor
256MB RAM or better
40GB Hard drive with space for installation
CD Rom
SVGA 800 x 600 minimum resolution display
Mouse & Keyboard

 

 

 

 

 
 
 

 

 



Advert